
Phono interconnects
Phono
Low-level phono interconnects for MC and MM cartridges — quiet geometry for the smallest signals in the chain.
Phono
Built for the quietest signals.
Phono signals sit far below line level. Shield behaviour, capacitance, and conductor uniformity decide whether the cartridge’s detail arrives intact or arrives dressed in cable noise.
These interconnects use Autria Alloy and carbon-fibre shielding, with geometry chosen for cartridge and phono-stage duty.
The Role
Microvolts, then silence.
A phono cable lives in a hostile neighbourhood: motors, steppers, digital clocks, and mains fields. Capacitance must suit the cartridge; the shield must reject without absorbing; the conductors must stay uniform so the tiny signal is not rewritten on the way to the stage.
We do not treat phono as a thinner RCA. It is its own brief.

In the System
From cartridge to stage.
Keep the run as short as the tonearm and phono stage allow. Match load advice from the cartridge maker; the cable should not fight the electrical termination you chose.
Entrée through Ultra stay inside one family — more of the same quiet path, not a different tonal recipe.
Typical use
Tonearm / phono stage · RCA or balanced as specified
Grades
Entrée · Standard · Ultra

Solid Core Conduction
One path. No strand hopping.
The goal is simple: the cleanest signals and power the system can carry. Testing made the foundation clear — solid conductors, not stranded.
Stranded wire is flexible and cheap to extrude. It also invites straying current: electrons leap between strands instead of flowing start to finish. That behaviour becomes incidental sound, loss of smoothness, and audible distortion.
Solid core keeps a single continuous path — so the cable carries the signal cleanly, without inter-strand current noise.

Bespoke Conductors
Autria Alloy — no grain boundaries.
Conductor material decides more than resistance. We tested high-purity copper, silver, gold, alloys, and plated metals. Higher frequencies travel on the outer perimeter; if the cross-section changes character toward the surface, speed and texture become uneven — imaging and stage lose accuracy.
Single-crystal copper and silver reduce grain jumps, yet still carry dense “copper sound” or “silver sound.” We wanted neither.
So we formulated our own conductor — Autria Alloy — then heat- and cryo-treated it after extrusion. Uniform properties across the section. Free from grain boundaries. Free from material signature.

Vari-Twist
Twisted — but never at one angle.
A simple twist reduces crosstalk, RFI, and EMI. Twist too hard, though, and capacitance and inductance rise, length grows, resistance grows, bandwidth narrows. A single fixed angle also resonates with particular frequencies.
Vari-Twist is our answer: the pair is twisted at a formulated, varying angle along the whole length. Interference stays low; resonance with any one band is diffused. Every length is calibrated for its duty.

Shielding
Carbon fibre — reject, don’t absorb.
Foil, braid, and metal tubes can claim total coverage. In our tests, metal absorbs interference and feeds it back — radio energy becomes electricity and magnetic field, dulling darkness, stage, and dynamics.
So we shield with carbon-fibre sleeve: unaffected by magnetic field, rejecting interference without absorption. Paired with Vari-Twist, the cable stays quiet without adding a metallic colouration.

100% Handmade
Hand-built to protect the conductor.
Machine twisting can undo the uniformity we worked for in the metal. So we build by hand — polished, insulated, coated, twisted, assembled, finished — slower by twenty to fifty times, freer from MOQ limits, wider in what we can offer. From roughly twenty hours to eighty, depending on the design.
No corners cut. Vari-Twist and Autria only stay consistent when the last millimetre is still human.

Three Grades, One Signature
Entrée. Standard. Ultra.
One sonic family, with more of the technology as you step up. Entrée introduces the range with natural ease. Standard brings the full set of our cable technologies. Ultra adds further complexity for systems that need the highest resolution.
The grade changes how much of the craft you bring in — not whether the cable colours the music.
Entrée
Natural ease — the first step into the WestminsterLab cable signature.
Standard
The full set of our cable technologies for everyday reference listening.
Ultra
Further complexity for systems that need the highest resolution.

Craft
Made by hand in Hong Kong.
Hand crafted, hand polished, insulated, coated, twisted, assembled, and finished — every cable, every time.
Per cable
From 20 up to 80 hours
Gallery
Gallery.
Specification
Phono
- Conductor
- Autria Alloy — heat- and cryo-treated solid core
- Duty
- MC / MM phono interconnects
- Geometry
- Low-level path · Vari-Twist where specified
- Shielding
- Carbon-fibre sleeve (non-absorbing)
- Finish
- Hand-polished, epoxy-protected, PTFE insulated
- Grades
- Entrée · Standard · Ultra
- Origin
- Handcrafted in Hong Kong