
Phono Preamplifier
Built for the softest cartridge signals.
MC, MM, or DS Audio — cartridge output is tiny. Monologue is designed for low noise, low distortion, and modular paths for each format.
Think Vinyl, Then Think Again
Low-level signal, treated carefully.
From power architecture to passive parts, from layout to listening — Monologue treats vinyl’s fragile current as a precision problem. Clarity without glare. Detail without added noise. Distortion, hiss, and false colour are designed out.
In ordinary passive parts, a musical signal loses a little as it passes. At line level that loss is easy to ignore. With vinyl it is not — the current is minute, and every loss becomes a missing detail.
We worked with specialist manufacturers on a passive signal-handling capacitor that keeps that loss negligible even for the softest groove — less glare, less distortion from the part itself.

Purest of the Pure
Controls that stay out of the way.
Industrial and electronic design stay quiet on purpose. No colour displays. No rotary clutter competing for attention. Complexity is reduced so the delicate signal from your record is protected, not decorated.
Fewer controls between you and the machine; more of the recording left alone.

Is All About Power
A custom supply, refined from Quest.
A custom 260-watt O-core transformer anchors a supply architecture refined from Quest — then tuned further for the lowest possible noise floor. Quiet power is how soft signals stay intact.
Six individual regulator rails feed the unit. Symmetrical dual-mono outputs keep left and right fully separate so channel talk stays in the music, not in the supply.
The supply stays quiet; the groove stays audible.


0
Power Architecture
Six rails.Dual mono.
Six individual regulator rails feed Monologue — dual-mono at the output so channel separation stays high and low-level detail stays intact.
Flexible & Modular
One chassis. Three cartridge paths.
A single optional module slot lets Monologue match the cartridge your system uses — without a new box for every change.
The MC/MM path uses an unconventional three-stage amplification design. Each stage is tuned to work with the RIAA equalisation it introduces, so distortion stays low and the signal stays accurate as gain is built.
Bespoke capacitors — developed for this low-level work — keep colour and loss out of the way. Presence, texture, and transient attack are what remain.
MC/MM Phono
Balanced XLR or unbalanced RCA, with impedance, capacitance, and gain steps for modern and vintage MC, MM, and MI cartridges. Three-stage amplification with stage-by-stage RIAA.
Mono MC/MM Phono
Single-channel unbalanced RCA for true mono cartridges — impedance, capacitance, and gain still fully stepped.
DS Audio Equaliser
Unbalanced RCA, DS Audio certified. Same coupling-capacitor and signal-handling approach as our MC/MM path, plus a dedicated LED supply for the cartridge and high-pass options (disable or −6 dB @ 20 Hz).

Meet the Family
Analogue electronics, end to end.
With Monologue, the line is complete: electronics and the connections between them, designed as one system. Listen again — there is still more in the grooves.

Craft
Made by hand in Hong Kong.
Machining
~90 hours
Hand assembly
~30 hours
Components
260
Gallery
Gallery.
Specification
Monologue
- Distortion
- <0.0001% @ 1 kHz
- Signal-to-noise
- >120 dB, unweighted
- Frequency response
- 2 Hz–100 kHz, 0.1 dB
- Channel separation
- >110 dB
- Input
- 1 × optional module
- Outputs
- 1 × balanced XLR
- Output voltage
- up to 12 Vrms
- Power
- Custom 260 W O-core transformer, 6 regulator rails, dual-mono outputs
- Dimensions
- W 232 × H 110 × D 392 mm
- Weight
- 12 kg
- Origin
- Handmade in Hong Kong
MC/MM Phono module
- Input
- Balanced XLR or unbalanced RCA
- Impedance
- 60 Ω–47 kΩ (18 steps)
- Capacitance
- 22–322 pF (5 steps)
- Gain
- 40–70 dB (4 steps)
- Compatibility
- Modern and vintage MC / MM / MI cartridges
- Output
- 19-pin proprietary socket
Mono MC/MM Phono module
- Input
- Single-channel unbalanced RCA
- Impedance
- 60 Ω–47 kΩ (18 steps)
- Capacitance
- 22–322 pF (5 steps)
- Gain
- 40–70 dB (4 steps)
- Compatibility
- Modern and vintage MC / MM mono cartridges
- Output
- 19-pin proprietary socket
DS Audio Equaliser module
- Input
- 1 × unbalanced RCA
- Gain
- 27 dB
- LED supply
- Dedicated regulated supply for the cartridge LED
- High-pass
- Disable or −6 dB @ 20 Hz
- Compatibility
- All DS Audio cartridges (DS Audio certified equaliser)
- Output
- 19-pin proprietary socket